For free delivery are missing -,--
Sum NET 0,00 €
Sum Gross 0,00 €
Price includes discounts
The Symbol : NKV200-4
VENTS NKV 200-4: four-row water heater for Ø200 mm channel. Copper-aluminium exchanger, galvanized housing, G 3/4′′ connection. Maximum 16 bar and +90°C of water. Weight: 8.2 kg. Power selected to working conditions.
The Availability Of : Średnia dostępność 30 opak
Price: 1190.00
Price: 1190.00
VENTS NKV 200-4 is a four-row water heater for heating air in ventilation. Version designed for round channels with nominal diameter of 200 mm. The four-tier water exchanger is used to heat the air; the operating parameters should be adapted to the ventilation and heating design.
The galvanised housing houses a heat exchanger with copper tubes and aluminium lamellas. Seals with adapters help to get a tight connection to the wires. The device requires the heating agent and air flow provided by the ventilation system to be connected to the circulation.
| Manufacturer / series | VENTS / NKV |
|---|---|
| Model | NKV 200-4 |
| Symbol | NKV200-4 |
| EAN | 4823059334607 |
| Type | Channel water heater |
| Nominal channel diameter | 200 mm |
| ØD diameter according to catalogue | 198 mm |
| Number of rows of pipes | 4 |
| Housing | Galvanised steel |
| Exchanger tubes | Copper |
| Exchanger lamelles | Aluminium |
| Maximum operating pressure | 1,6 MPa (16 bar) |
| Maximum water operating temperature | +90°C |
| Water connection K | G 3/4′′ |
| Dimensions B × H × L according to figure | 400 × 280 × 300 mm |
| Dimensions H3 / L1 / L2 / L3 | 200 / 28 / 65 / 220 mm |
| Mass | 8,2 kg |
Heating power is not one constant value. Depends on the inlet air consumption and temperature and heating factor parameters. The selection shall be based on the characteristics of the manufacturer for the four-row version.
Consider the flow direction indicated on the housing and the possibility of venting the exchanger. Apply the filter before the heater. The manufacturer recommends installation behind the fan, with an interval of at least two diameters of the heater, and control automation and protection against freezing. The details of the connection shall be specified by the manufacturer’s documentation.
To a channel with a nominal diameter of 200 mm. In the manufacturer's table the size of the ØD connector is 198 mm; these are two different sizes describing the selection and execution of the connector.
Means four rows of exchanger pipes. This description refers to the version NKV 200-4.
Nope. The air is heated with heat transmitted by the agent in water circulation. The heater requires a suitable heat source.
According to the catalogue using water, installation is provided inside the rooms. External assembly requires a non-freezing mixture as a heat carrier and a solution to the installation according to the manufacturer's documentation.
Vents
Brzozowa 8
64-320 Niepruszewo
Poland
606376838
info@wentec.pl
![[{[item.product.name]}]]([{[item.product.photo.url]}] 75w)
